m³/h
Input value for V must be between 100 and 4000
m
Input value for L must be between 3 and 20
m
Input value for H must be between 0 and 1
°C
Input value for dtz must be between -15 and 15
Extract Air
Plenum Insulation
Frame made out of anodized aluminium profiles,.Fixed plastic rectangular mesh. Fixing with visible screws (wall and ceiling). Fixing without visible screws (UR) only in wall.
{{vm.Selection.OrderCode}} {{vm.Selection.PlenumOrderCode}}
Type
Size
Size
V min
[m3/h]
V max
[m3/h]
LpReg
[db(A)]
LpRad
[db(A)]
Width
[mm]
Height
[mm]
Length
[mm]
Number of rows
Number of fans
Heating capacity
W
Water flow rate
kg/h
Water outlet temperature
°C
Splitter width
[mm]
Splitter gap
[mm]
No. of splitters
Mass
[kg]
Aef
[m²]
B min
[m]
vef
[m/s]
vH
[m/s]
vL
[m/s]
Blade angle
[deg]
Blade angle
[deg]
Jet deflection
[m]
Jet penetration
[m]
Jet throw
[m]
Vh1
[m/s]
Vl
[m/s]
hmax, 45° angle
[m]
hmax, 60° angle
[m]
hmax, 75° angle
[m]
hmax, 90° angle
[m]
dp
[pa]
Lwa
[dB(A)]
63 Hz
[dB]
125 Hz
[dB]
250 Hz
[dB]
500 Hz
[dB]
1 kHz
[dB]
2 kHz
[dB]
4 kHz
[dB]
8 kHz
[dB]
+ {{r.DifType}} {{r.Size}} {{r.VAVSize}} {{r.VAV_Vmin_out}} {{r.VAV_Vmax_out}} {{r.VAV_LpReg |number:0}} {{r.VAV_LpRad |number:0}} {{r.Width}} {{r.Height}} {{r.Length}} {{r.RowCount}} {{r.FanCount}} {{r.FCQh }} {{r.FCQm }} {{r.FCTwout }} {{r.SpliterWidth}} {{r.SpliterGap}} {{r.AttSplNum}} {{r.AttMass | number:1}} {{r.Aef |number:4}} {{r.b_min|number:2}} >10 <1 {{r.vef|number:2}} {{r.vH |number:2}} {{r.vL|number:2}} >90 <45 {{r.alpha_min|number:0}} >50 <30 {{r.alpha_max|number:0}} {{r.JetDrop|number:1}} {{r.JetDepth|number:1}} {{r.Throw|number:1}} {{r.JetVh|number:2}} {{r.JetVl|number:2}} {{r.h_max_1|number:1}} {{r.h_max_2|number:1}} {{r.h_max_3|number:1}} {{r.h_max_4|number:1}} >80 <4 {{r.dp | number:0}} >60 <10 {{r.Lwa|number:0}} {{r.De63|number:0}} {{r.De125|number:0}} {{r.De250|number:0}} {{r.De500|number:0}} {{r.De1k|number:0}} {{r.De2k|number:0}} {{r.De4k|number:0}} {{r.De8k|number:0}}
Vrh