Klimaoprema SolveAir

PRODUCTS /FLOOR CONVECTORS /PKN

Input selection

Length, (L), mm

Width (W), mm

Height (H), mm

Minimal capacity (Qmin), W

Input value for inRoomTemp must be between 10 and 40

Room temperature (Tp), °C

Input value for Water inlet temperature must be between 35 and 95

Water inlet temperature (Tw_in) ,°C

Input value for Water outlet temperature must be between 35 and 95

Water outlet temperature (Tw_out), °C

Input value for Water flow rate must be between 0 and 1

Water flow rate (m_w), kg/h

numberOfConnection

Connection Diameter

Selected equipment

Technical description|

Natural convection is used for heat transfer from heating element to the surrounding air. Cold air is heavier and falls to the bottom of the casing. Air is then heated by a heat exchanger. As it gets warmer, it rises, and leaves the room for new cold air to fill the casing.
• Length: 1000 to 3000 mm
• Height: 70,110 or 140 mm
• Heat output: 66 - 2570 W
• Heat exchanger: 1-row, 2-row, 3-row

Selected: {{vm.Selection.OrderCode}} {{vm.Selection.PlenumOrderCode}}

	Type	Size	Size	V_min [m³/h]	V_max [m³/h]	L_{p reg} [dB(A)]	L_{p Rad} [dB(A)]	Width [mm]	Height [mm]	Length [mm]	Heating capacity [W]	Heating capacity,max [W]	Cooling capacity,max [W]	Heating capacity,max [W]	Cooling capacity,max [W]	Water flow rate [l/h]	Water outlet temperature [°C]	Splitter width [mm]	Splitter gap [mm]	No. of splitters	Mass [kg]	A_ef [m²]	B_min [m]	v_ef [m/s]	v_h [m/s]	v_L [m/s]	Blade angle [deg]	Blade angle [deg]	Jet deflection [m]	Jet penetration [m]	Jet throw [m]	Vh1 [m/s]	Vl [m/s]	hmax, 45° angle [m]	hmax, 60° angle [m]	hmax, 75° angle [m]	hmax, 90° angle [m]	Pressure drop [Pa]	Price [€]	L_wa [dB(A)]	63 Hz [dB]	125 Hz [dB]	250 Hz [dB]	500 Hz [dB]	1 kHz [dB]	2 kHz [dB]	4 kHz [dB]	8 kHz [dB]
+	{{r.DifType}}	{{r.Size}}	{{r.VAVSize}}	{{r.VAV_Vmin_out}}	{{r.VAV_Vmax_out}}	{{r.VAV_LpReg \|number:0}}	{{r.VAV_LpRad \|number:0}}	{{r.Width}}	{{r.Height}}	{{r.Length}}	{{r.FCQh }}	{{r.FC_Qh_100 \| number:0 }}	{{r.FC_QhMax \| number:0 }}	{{r.FCQm }}	{{r.FCTwout }}	{{r.SpliterWidth}}	{{r.SpliterGap}}	{{r.AttSplNum}}	{{r.AttMass \| number:1}}	{{r.Aef \|number:4}}	{{r.b_min\|number:2}}	>10 <1 {{r.vef\|number:2}}	{{r.vH \|number:2}}	{{r.vL\|number:2}}	{{r.alpha_min}}	{{r.alpha_max}}	{{r.JetDrop\|number:1}}	{{r.JetDepth\|number:1}}	{{r.Throw\|number:1}}	{{r.JetVh\|number:2}}	{{r.JetVl\|number:2}}	{{r.h_max_1\|number:1}}	{{r.h_max_2\|number:1}}	{{r.h_max_3\|number:1}}	{{r.dp\|number:0}}	{{r.price \| number:2}}	>60 <10 {{r.Lwa\|number:0}}	{{r.De63\|number:0}}	{{r.De125\|number:0}}	{{r.De250\|number:0}}	{{r.De500\|number:0}}	{{r.De1k\|number:0}}	{{r.De2k\|number:0}}	{{r.De4k\|number:0}}	{{r.De8k\|number:0}}

Input selection

Add to my projects

{{vm.Selection.OrderCode}}

{{vm.Selection.PlenumOrderCode}}