Klimaoprema SolveAir

PRODUCTS /FIRE DAMPERS /FDC

Input selection

Input value for V must be between 540 and 21700

Air volume (V), m³/h

Drive

numberOfConnection

Connection Diameter

Installation

Technical description|

• Used for the isolation of duct penetrations between fire compartments
• Fire dampers consist of housing, fire-resistant damper blade and release mechanism
• Casing made of galvanised sheet steel, damper blade made of special insulating material, damper blade shaft and push rod made of galvanized steel, bearings made of brass, seals made of polyurethane and elastomer
• Closed blade air leakage according to EN 1751, class 3
• Casing air leakage to EN 1751, class C
• Fire damper can be equipped with thermic fuse with 72°C or for warm air ventilation systems 95°C release temperature
• Fire damper casing is manufactured form galvanized steel

Other casing materials on request:
• Galvanized steel and powder coated
• Stainless steel
• Stainless steel and powder coated
• Fire damper for areas with potentially explosive atmospheres are also available (for additional information see FD-Ex catalog)

Selected: {{vm.Selection.OrderCode}} {{vm.Selection.PlenumOrderCode}}

	Type	Size	Size	V_min [m³/h]	V_max [m³/h]	L_{p reg} [dB(A)]	L_{p Rad} [dB(A)]	Width [mm]	Height [mm]	Length [mm]	Heating capacity [W]	Heating capacity,max [W]	Cooling capacity,max [W]	Heating capacity,max [W]	Cooling capacity,max [W]	Water flow rate [l/h]	Water outlet temperature [°C]	Splitter width [mm]	Splitter gap [mm]	No. of splitters	Mass [kg]	A_ef [m²]	B_min [m]	v_ef [m/s]	v_h [m/s]	v_L [m/s]	Blade angle [deg]	Blade angle [deg]	Jet deflection [m]	Jet penetration [m]	Jet throw [m]	Vh1 [m/s]	Vl [m/s]	hmax, 45° angle [m]	hmax, 60° angle [m]	hmax, 75° angle [m]	hmax, 90° angle [m]	dp [Pa]	Price [€]	L_wa [dB(A)]	63 Hz [dB]	125 Hz [dB]	250 Hz [dB]	500 Hz [dB]	1 kHz [dB]	2 kHz [dB]	4 kHz [dB]	8 kHz [dB]	63 Hz [dB(A)]	125 Hz [dB(A)]	250 Hz [dB(A)]	500 Hz [dB(A)]	1 kHz [dB(A)]	2 kHz [dB(A)]	4 kHz [dB(A)]	8 kHz [dB(A)]
+	{{r.DifType}}	{{r.Size}}	{{r.VAVSize}}	{{r.VAV_Vmin_out}}	{{r.VAV_Vmax_out}}	{{r.VAV_LpReg \|number:0}}	{{r.VAV_LpRad \|number:0}}	{{r.Width}}	{{r.Height}}	{{r.Length}}	{{r.FCQh }}	{{r.FC_Qh_100 \| number:0 }}	{{r.FC_QhMax \| number:0 }}	{{r.FCQm }}	{{r.FCTwout }}	{{r.SpliterWidth}}	{{r.SpliterGap}}	{{r.AttSplNum}}	{{r.AttMass \| number:1}}	{{r.Aef \|number:4}}	{{r.b_min\|number:2}}	>10 <1 {{r.vef\|number:2}}	{{r.vH \|number:2}}	{{r.vL\|number:2}}	{{r.alpha_min}}	{{r.alpha_max}}	{{r.JetDrop\|number:1}}	{{r.JetDepth\|number:1}}	{{r.Throw\|number:1}}	{{r.JetVh\|number:2}}	{{r.JetVl\|number:2}}	{{r.h_max_1\|number:1}}	{{r.h_max_2\|number:1}}	{{r.h_max_3\|number:1}}	>80 <4 {{r.dp \| number:0}}	{{r.price \| number:2}}	>60 <10 {{r.Lwa\|number:0}}	{{r.De63\|number:0}}	{{r.De125\|number:0}}	{{r.De250\|number:0}}	{{r.De500\|number:0}}	{{r.De1k\|number:0}}	{{r.De2k\|number:0}}	{{r.De4k\|number:0}}	{{r.De8k\|number:0}}	{{r.Lw_A_63\|number:0}}	{{r.Lw_A_125\|number:0}}	{{r.Lw_A_250\|number:0}}	{{r.Lw_A_500\|number:0}}	{{r.Lw_A_1k\|number:0}}	{{r.Lw_A_2k\|number:0}}	{{r.Lw_A_4k\|number:0}}	{{r.Lw_A_8k\|number:0}}

Input selection

Add to my projects

{{vm.Selection.OrderCode}}

{{vm.Selection.PlenumOrderCode}}